Acrylic soap stamps will be available for purchase again after the holidays.
This custom acrylic stamp will embed your logo or image in your hand made soap! This is NOT a rubber stamp. It cannot be inked. It is meant only for use with soap and clay.
Please note that a good imprint in soap is most achievable with cold process soaps. Melt & Pour soaps are harder and more brittle and it can be difficult to achieve an even imprint. Acrylic really isn't the best medium for Melt & Pour soaps. If stamping Melt & Pour soap, it's best to unmold your soaps as quickly as possible, and attempt to stamp them while still somewhat soft. Gauging that window perfectly will take some practice. Alternatively, adding a small amount of distilled water (1 - 2 ounces per pound of base) will keep the bars softer longer.
For a full soap stamping tutorial, click here to check out my blog post!
• SIZING •
The size options are:
- up to 3 inches (76 mm) wide and up to 2 inches (51 mm) high.
- up to 3 1/2 inches (9 cm) wide and up to 2 1/2 inches (6 cm) high.
I recommend allowing at least 1/2" white space all the way around the design. If your soaps are 4 inches wide, a 3 inch wide design is as large as you'll want.
• MOUNT •
This is a laser engraved acrylic block with wood handle.
• FILE •
A true black and white digital file of your logo image with at least 400dpi is required to produce your stamp. If alteration of your image is required, there is a $10 fee if I am able to complete the service for you. In that case, I will provide you with a digital proof of your stamp within 5 business days of purchase. If you would like me to create a custom design for your stamp, contact me and let me know what you have in mind. If you have any issues uploading your file here, feel free to check out without uploading a file and I'll contact you via email for it.
• TIMING •
Please allow up to two to three weeks for production before shipping.